All parts of the SeedSigner+ for self-assembly: PCB with 2-inch display and D-pad, Raspberry Pi Zero with soldered header, camera, 3D-printed case in black/orange. WITHOUT SD card and WITHOUT image – you flash that yourself.
The SeedSigner+ as a kit: the same parts as the fully assembled SeedSigner+, just not put together yet. You receive the individual parts and build the device yourself – no soldering iron needed, the header on the Pi Zero is already soldered. Assembly takes about half an hour, and afterwards you know exactly what is inside your signing device.
Included in the kit:
– SeedSigner+ PCB with 2-inch display, D-pad and three buttons, USB-C socket (power only, data lines not connected) and spring-loaded microSD slot
– Raspberry Pi Zero v1.3 with soldered header (the version without Wi-Fi and Bluetooth)
– Raspberry Pi camera with ribbon cable
– microSD extension to the card slot in the case
– 3D-printed case in black/orange: shell, faceplate and button caps
Not included: microSD card and SeedSigner image. You source and flash both yourself – so no third-party software ever enters your signing device.
Like every SeedSigner, the device works fully offline and does not remember your seed (stateless): the seed is loaded fresh each session, via QR code, dice or word list.
