Rugged RuggedPill case — SeedSigner fully assembled.
The Rugged Pill is a fully assembled SeedSigner in the Rugged Pill case: the same electronics as the classic OpenPill, but in a thicker-walled shell that shrugs off knocks. The case comes two-tone in black and orange, with an M2.5 threaded insert as the joystick head. If your signing device regularly rides in a backpack, a car or your luggage, this is the version to get.
Inside is the proven build: Raspberry Pi Zero 1.3 (no Wi-Fi, no Bluetooth), a Waveshare 1.3-inch display at 240 × 240 pixels and the Pi camera for SeedQR and PSBT codes. The device works fully offline and remembers nothing: the seed is loaded fresh each session and is gone once you power off. Transactions travel exclusively as QR codes between the Rugged Pill and your wallet, for example Sparrow, Specter, BlueWallet or Nunchuk.
In the box: the Rugged Pill fully assembled and function-tested.
Deliberately not in the box: microSD card, image and USB cable. You download the SeedSigner software from github.com/SeedSigner yourself, verify it and write it to your own card. That way nobody but you has had software on this device, and that includes us.
Printed and assembled by us in Germany, in small batches. If you would rather build it yourself, the DIY kit is in the shop; if you want a larger display, look at the SeedSigner+.
Dual-USB variant: the case has a second opening so both USB ports of the Pi Zero are accessible – for anything that needs power and data at the same time, for example the SeedHammer controller, which runs on exactly this hardware (own firmware, not included). Same electronics, same box contents, 12 € extra.
